Low porosity clay brick
+
  • Low porosity clay brick

Low porosity clay brick


Product Introduction

Low porosity clay brick is used as the main raw material, with the addition of aluminum-silicon materials such as pyroxene, silica wire stone, rhodochrosite, etc., and the clay products with low porosity are pressed and fired. It is characterized by high compressive strength, erosion resistance, high load softening onset temperature and good thermal shock stability at low and medium temperatures.

Product Details


Production method:

Clay clinker is used as the main raw material, and aluminum-silicon materials such as scorch, sillimanite and andalusite are added, and the low porosity clay products are pressed and fired. It has the characteristics of high compressive strength, corrosion resistance, high load softening start temperature and good heat shock stability in medium and low temperature.

In order to adapt to the working environment of the glass tank kiln, the factors leading to the damage of the kiln lining are comprehensively considered: chemical erosion, mechanical erosion, temperature fluctuation, etc., to produce clay bricks with different properties, such: low porosity clay brick (apparent porosity rate is not more than 15%), low porosity clay brick (apparent porosity rate is not more than 10%), low creep, low porosity, low iron three low clay brick (commonly known as three low brick), etc.

Main characteristics: Low porosity, compact overall structure, can effectively reduce the high temperature gas and solution penetration and diffusion, enhance the use of high temperature effect.

Uses: Low porosity clay bricks are widely used in various high temperature industrial kilns, such as glass kilns, cement kilns, metallurgical kilns, etc. In the glass industry, low porosity clay bricks are often used in the lower part of the regenerator and wall parts of the glass furnace.

Physical and chemical indicators:

Physical And Chemical Indexes Of Low Porosity Clay Brick

Project

Physical And Chemical Index

Brand

DN-10

DN-13

DN-15

DN-17

DN-19

Chemical Composition

Al203(%)≥

40 

42 

45 

47 

45 

Fe203(%)≥

1.3 

1.5 

1.8 

1.8 

2.0 

Bulk Density (g/cm3) ≥

2.25 

2.2 

2.2 

2.2 

2.15 

Percent Porosity (%)≤

10 

13 

15 

17 

19 

Normal Temperature Compressive Strength (Mpa)≥

70 

65 

60 

55 

50 

Load softening Temperature (℃)

1480 

1460 

1450 

1430 

1420 

Keywords:

Low porosity clay brick

Kiln Display


Nodata

Feedback

Leave an online message and get free product quotes